No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server V100R005 User Guide 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Device Operating Status

Checking Device Operating Status

Procedure

  1. Powering on the chassis, For details, see Powering On.
  2. Check the chassis operating status.

    • All fans run at full speed and then at an even speed. Strong air is exhausted from the air exhaust vents at the rear of the chassis.
    • All fans are properly operating without sharp noises.
    • The operating status indicators on all PSUs and fan modules are steady green.

  3. Check the server node operating status.

    The status indicators and hard disk activitiy indicators on all server nodes are steady green.

Translation
Download
Updated: 2018-08-28

Document ID: EDOC1100036738

Views: 9831

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next