No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


X6800 Server V100R005 User Guide 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Data

Default Data


To ensure system security, change the initial password at the first login and change the password periodically.

Default Data for the Management Module

Table 4-1 lists the default data for the management module.

Table 4-1 Default data for the management module

Default User Name

Default Password

Default IP Addresses

Default Subnet Mask



  • HMM V1.62 and later:

  • Earlier than HMM V1.62:

Default Data for Server Nodes

Table 4-2 lists the default data for server nodes.

Table 4-2 Default data for server nodes

Server Node

Default User Name

Default Password

Default IP Addresses

Default Subnet Mask

XH628 V5



  • Slot 1:
  • Slot 3:
  • Slot 5:
  • Slot 7:


N in "Node iBMC Default Network Setting 10.10.1.(100+N)" on the chassis label indicates the server node slot number, namely 1, 3, 5, and 7.

Updated: 2018-08-28

Document ID: EDOC1100036738

Views: 9448

Downloads: 33

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next