No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


X6800 Server V100R005 User Guide 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Server Node

Configuring a Server Node

This topic describes how to configure a server node so that it can support upper-layer services.

Figure 4-13 shows the initial configuration process for a server node.

Figure 4-13 Initial configuration process

Table 4-5 describes the initial configuration process.

Table 4-5 Initial configuration process



Check the server node.

  • Query server node version information and ensure that the version information meets site requirements.
  • Check for server node alarms.

Configure the iBMC.

  • Change the iBMC user name and password for the server node.
  • Set the iBMC IP address for the server node.

Change the initial password for the iBMC U-Boot.

Change the U-Boot password.

Log in to the real-time desktop.

Log in to the iBMC WebUI, and then log in to the operating system (OS) of the server node in remote control mode.

Configure RAID.

For details about how to configure RAID, see the Huawei V5 Server RAIDController Card User Guide .

Configure the BIOS.

Configure parameters in the server node BIOS, including setting the boot option priority and BIOS password, enabling the NIC Preboot Execution Environment (PXE) function, and setting the PXE option.

Install an OS.

Install an OS for the server node.

For details about how to configure a server node, see the XH628 V5 Server Node V100R005 User Guide

Updated: 2018-08-28

Document ID: EDOC1100036738

Views: 9819

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next