No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


X6800 Server V100R005 User Guide 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the RAID Controller Card

Configuring the RAID Controller Card

The RAID configuration method varies depending on the RAID controller card model. For details about how to configure RAID, see the Huawei V5 Server RAID Controller Card User Guide .

The XH628 V5 supports LSI SAS3408, Avago SAS3004iMR, LSI SAS3508 RAID cards.

  • Intel SoftRAID is supported if the disks are connected to the server through the PCH rather than through RAID controller cards.
  • Intel SoftRAID is available only on a server with the Intel RSTe driver.
  • Intel SoftRAID supports RHEL 7.3, RHEL 7.4, Windows Server 2012 R2, and Windows Server 2016.
  • If Intel SoftRAID is configured for a server, the BIOS can be set only to the Legacy or UEFI mode and the OS can be installed only on a SATA hard disk.
Updated: 2018-08-28

Document ID: EDOC1100036738

Views: 9830

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next