No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro XH628 V5 Server Node V100R005 Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Drive Drawer

Installing the Drive Drawer


  1. Place the server node on the ESD workstation.
  2. Take the spare part out of its ESD bag.
  3. Determine the position of the drive drawer.

    Figure 3-17 Positions of the drive drawers

  4. Connect the cable carrier to the compute module.

    For details, see Installing the Cable Carrier .

  5. Install the drive drawer.

    1. Align the guide pins of the compute module with the notches on the drive drawer, vertical place the compute node to the drive drawer, and horizontally push the compute module as far as it will go. See (1) in Figure 3-18.
    2. Tighten the screws marked silkscreen "A" on the server node case. See (2) in Figure 3-18.
      Figure 3-18 Installing the server node cover

  6. Connect the cable carrier to the drive drawer.

    For details, see Installing the Cable Carrier .

  7. Install the server node.

    For details, see Installing an XH628 V5.

  8. Power on the server node.

    For details, see Power-On Procedure.

Updated: 2019-08-12

Document ID: EDOC1100036739

Views: 15278

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next