No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH628 V5 Server Node V100R005 Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators and Buttons

Indicators and Buttons

Positions

  • 2 x 2.5" drive configuration
    Figure 11-3 Indicators and buttons on the front panel

    1

    Data transmission rate indicator for a 10GE optical port

    2

    Connection status indicator/Data transmission status indicator for a 10GE optical port

    3

    Power button/indicator

    4

    Health status indicator

    5

    UID button/indicator

    6

    Data transmission status indicator for a GE electrical port

    7

    Connection status indicator for a GE electrical port

    8

    Data transmission status indicator for the management network port

    9

    Connection status indicator for the management network port

    -

    -

  • 2 x HHHL PCIe card configuration
    Figure 11-4 Indicators and buttons on the front panel

    1

    Data transmission rate indicator for a 10GE optical port

    2

    Connection status indicator/Data transmission status indicator for a 10GE optical port

    3

    Power button/indicator

    4

    Health status indicator

    5

    UID button/indicator

    6

    Data transmission status indicator for a GE electrical port

    7

    Connection status indicator for a GE electrical port

    8

    Data transmission status indicator for the management network port

    9

    Connection status indicator for the management network port

    10

    Network port activity indicator

    11

    Network port link indicator

    -

    -

Indicator and Button Description

Table 11-1 Indicators and buttons on the front panel

Silkscreen

Indicator/Button

Description

Power button/indicator

Power indicator:

  • Off: The device is not powered on.
  • Steady yellow: The device is powered on.
  • Blinking yellow: The power button is locked. The power button is locked when the iBMC is starting.
  • Steady green: The device is ready to power on.

Power button:

  • When the device is powered on, you can press this button to gracefully shut down the OS.
  • When the device is powered on, holding down this button for 6 seconds will forcibly power off the device.
  • When the power indicator is steady green, you can press this button to power on the device.

HLY

Health status indicator

  • Off: The device is powered off or is faulty.
  • Blinking red at 1 Hz: A major alarm has been generated on the system.
  • Blinking red at 5 Hz: A critical alarm has been generated on the system.
  • Steady green: The device is operating properly.

UID button/indicator

The UID button/indicator helps identify and locate a device.

UID indicator:

  • Off: The device is not being located.
  • Blinking blue: The device has been located and is differentiated from other devices that have also been located.
  • Steady blue: The device is being located.

UID button:

  • You can turn on or off the UID indicator by pressing the UID button on the panel or by using the iBMC CLI or WebUI.
  • You can press this button to turn on or off the UID indicator.
  • You can press and hold down this button for 4 to 6 seconds to reset the iBMC.

-

Data transmission rate indicator for a 10GE optical port

  • Off: The network port is not connected.
  • Steady green: The data transmission rate is 10 Gbit/s.
  • Steady yellow: The data transmission rate is 1 Gbit/s.

-

Connection status indicator/Data transmission status indicator for a 10GE optical port

  • Off: The network port is not connected.
  • Blinking green: Data is being transmitted.
  • Steady green: The network port is properly connected.

-

Data transmission status indicator for a GE electrical port

  • Off: The network port is not connected.
  • Steady yellow: The network port is in active status.
  • Blinking yellow: Data is being transmitted.

-

Connection status indicator for a GE electrical port

  • Off: The network port is not connected.
  • Steady green: The network port is properly connected.

-

Data transmission status indicator for the management network port

  • Off: No data is being transmitted.
  • Blinking yellow: Data is being transmitted.

-

Connection status indicator for the management network port

  • Off: The network port is not connected.
  • Steady green: The network port is properly connected.

LINK

Network port link indicator

  • Off: The network port is not connected.
  • Steady green: The network port is properly connected.

ACT

Network port activity indicator

  • Off: The network port is idle.
  • Blinking orange: Data is being transmitted.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100036739

Views: 16405

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next