No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH628 V5 Server Node V100R005 Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the M.2 FRU from the Avago SAS3004iMR RAID Controller Card

Removing the M.2 FRU from the Avago SAS3004iMR RAID Controller Card

The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.

Procedure

  1. Determine the position of the M.2 FRU on the Avago SAS3004iMR RAID controller card.
  2. Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.

    1. Open the handle of the M.2 FRU. See (1) in Figure 4-12.
    2. Remove the M.2 FRU. See (2) in Figure 4-12.
    3. Place the removed M.2 FRU into an ESD bag.
    Figure 4-12 Removing an M.2 FRU

  3. Place the removed component in an ESD bag.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100036739

Views: 15635

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next