No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH628 V5 Server Node V100R005 Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power-Off Procedure

Power-Off Procedure

NOTE:
  • Powering off a server node will interrupt all services and programs running on it. Therefore, before powering off a server node, ensure that all services and programs have been stopped or migrated to other server nodes.
  • The "power-off" mentioned here is an operation performed to change the server node to the standby state (the power indicator is steady yellow).
  • After a server node is powered off forcibly, wait for more than 10 seconds for the server node to power off completely. Do not power on the server node again before it is completely powered off.
  • Forced power-off may damage user programs or unsaved data. Exercise caution when performing this operation.

The server node can be powered off in any of the following ways:

  • Power off the chassis.

    The server node will be powered off along with the chassis.

  • Press the power button on the server node front panel to power off the server node gracefully.

    For details, see Indicators and Buttons.

  • Hold down the power button on the server node front panel for six seconds to power off the server node forcibly.

    For details, see Indicators and Buttons.

  • Use the iBMC WebUI.
    1. Log in to the iBMC WebUI.

      For details, see Logging In to the iBMC WebUI.

    2. Choose Power > Power Control.

      The Power Control page is displayed.

    3. Click Power Off or Forced Power Off.

      A confirmation message is displayed.

    4. Click Yes.
  • Use the iBMC CLI.
    1. Log in to the iBMC CLI.

      For details, see Logging In to the CLI.

    2. Run the following command:

      ipmcset -d powerstate -v 1

    3. Type y or Y and press Enter.
  • Use the Remote Virtual Console.
    1. Log in to the Remote Virtual Console.

      For details, see Logging In to the Desktop of a Server.

    2. On the KVM screen, click or on the toolbar.
    3. Choose Power Off or Forced Power Off.

      A dialog box is displayed.

    4. Click Yes.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100036739

Views: 16308

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next