No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH628 V5 Server Node V100R005 Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the Independent Remote Console

Using the Independent Remote Console

Scenarios

Log in to the desktop of a server using the Independent Remote Console.

NOTE:

When the client OS and iBMC versions are compatible with the Independent Remote Console, the Independent Remote Console provides easier operations than the Remote Virtual Console. You can download the Independent Remote Console (IRC) at Independent Remote Console.

Windows

The following Windows versions are supported:

  • Windows 7 32-bit or 64-bit
  • Windows 8 32-bit or 64-bit
  • Windows 10 32-bit or 64-bit
  • Windows Server 2008 R2 32-bit or 64-bit
  • Windows Server 2012 64-bit
Procedure
  1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC.

    The IP address configured and the iBMC management network port IP address must be on the same network segment.

  2. Double-click KVM.exe.

    The Connect to iBMC dialog box is displayed.

    Figure 13-5 Connect to iBMC

  3. Enter the network address, user name, and password.

    NOTE:
    • The network address can be in any of the following formats:
      • iBMC management network port IP address (IPv4 or IPv6 address):Port number

        Enter an IPv6 address in brackets or an IPv4 address directly, for example, [2001::64]:444 or 192.168.100.1:444.

      • iBMC domain name address:Port number
    • When the port number is the default port number 443, the port number can be left blank.

  4. Select a login mode.

    • Shared Mode: allows two users to access and manage a server at the same time. Each user can view the operations performed by the other user.
    • Private Mode: allows only one user to access and manage a server at a time.

  5. Click Connect.

    A security warning is displayed.

    Figure 13-6 Security warning

  6. Click Yes.

    NOTE:
    • Click No to return to the login interface.
    • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The server desktop is displayed.

    Figure 13-7 Server desktop

Ubuntu

The following Ubuntu versions are supported:

  • Ubuntu 14.04 LTS
  • Ubuntu 16.04 LTS
Procedure
  1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC.

    The IP address configured and the iBMC management network port IP address must be on the same network segment.

  2. Open the console and set the folder where the IRC is stored as the working folder.
  3. Run the chmod 777 KVM.sh command to set the permission for the Independent Remote Console.
  4. Open the Independent Remote Console.

    ./KVM.sh

    The Connect to iBMC dialog box is displayed.

    Figure 13-8 Connect to iBMC

  5. Enter the network address, user name, and password.

    NOTE:
    • The network address can be in any of the following formats:
      • iBMC management network port IP address (IPv4 or IPv6 address):Port number

        Enter an IPv6 address in brackets or an IPv4 address directly, for example, [2001::64]:444 or 192.168.100.1:444.

      • iBMC domain name address:Port number
    • When the port number is the default port number 443, the port number can be left blank.

  6. Select a login mode.

    • Shared Mode: allows two users to access and manage a server at the same time. Each user can view the operations performed by the other user.
    • Private Mode: allows only one user to access and manage a server at a time.

  7. Click Connect.

    A security warning is displayed.

    Figure 13-9 Security warning

  8. Click Yes.

    NOTE:
    • Click No to return to the login interface.
    • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The server desktop is displayed.

    Figure 13-10 Server desktop

macOS

The following macOS version is supported:

  • Mac OS X El Capitan
Procedure
  1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC.

    The IP address configured and the iBMC management network port IP address must be on the same network segment.

  2. Open the console and set the folder where the IRC is stored as the working folder.
  3. Run the chmod 777 KVM.sh command to set the permission for the Independent Remote Console.
  4. Open the Independent Remote Console.

    ./KVM.sh

    The Connect to iBMC dialog box is displayed.
    Figure 13-11 Connect to iBMC

  5. Enter the network address, user name, and password.

    NOTE:
    • The network address can be in any of the following formats:
      • iBMC management network port IP address (IPv4 or IPv6 address):Port number

        Enter an IPv6 address in brackets or an IPv4 address directly, for example, [2001::64]:444 or 192.168.100.1:444.

      • iBMC domain name address:Port number
    • When the port number is the default port number 443, the port number can be left blank.

  6. Select a login mode.

    • Shared Mode: allows two users to access and manage a server at the same time. Each user can view the operations performed by the other user.
    • Private Mode: allows only one user to access and manage a server at a time.

  7. Click Connect.

    A security warning is displayed.

    Figure 13-12 Security warning

  8. Click Yes.

    NOTE:
    • Click No to return to the login interface.
    • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The server desktop is displayed.

    Figure 13-13 Server desktop

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100036739

Views: 15618

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next