No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro XH628 V5 Server Node V100R005 Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Riser Card

Installing the Riser Card


  1. Power off the server node.

    For details, see Power-Off Procedure.

  2. Remove the server node.

    For details, see Removing an XH628 V5.

  3. Place the server node on the ESD workstation.
  4. Remove the drive drawer.

    For details, see Removing the Drive Drawer.

  5. Determine the position of the riser card.
  6. Take the spare part out of its ESD bag.
  7. Install the riser card.

    1. Insert the riser card into the PCIe card bracket. See (1) in Figure 3-20.
    2. Tighten the screws on the riser card using a Phillips screwdriver. See (2) in Figure 3-20.
      Figure 3-20 Installing a riser card

  8. Install the PCIe card.

    For details, see Installing a PCIe Card.

  9. Install the drive drawer.

    For details, see Installing the Drive Drawer.

  10. Install the server node.

    For details, see Installing an XH628 V5.

  11. Power on the server node.

    For details, see Power-On Procedure.

Updated: 2019-08-12

Document ID: EDOC1100036739

Views: 16497

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next