No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH628 V5 Server Node V100R005 Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the CLI Using PuTTY over a Serial Port

Logging In to the CLI Using PuTTY over a Serial Port

Scenarios

Use PuTTY to log in to a server over a serial port when:

  • You want to perform initial configuration of the server.
  • The server is inaccessible over a network port.
NOTE:
  • You can obtain the PuTTY software from the chiark home page.
  • You are advised to use PuTTY of the latest version. PuTTY of an earlier version may cause login failures.

Procedure

  1. On the PC, double-click PuTTY.exe.

    The PuTTY Configuration window is displayed.

  2. In the navigation tree, choose Connection > Serial.
  3. Set the login parameters.

    The parameters are described as follows:

    • Serial Line to connect to: COMn
    • Speed (baud): 115200
    • Data bits: 8
    • Stop bits: 1
    • Parity: None
    • Flow control: None
    NOTE:

    n in COMn indicates a serial port number, and its value is an integer.

  4. In the navigation tree, choose Session.
  5. Select Serial under Connection type.

    Figure 13-15 PuTTY Configuration

  6. Set Close window on exit to Only on clean exit.

    NOTE:

    Set Saved Sessions and click Save. You can double-click the saved record in Saved Sessions to log in to the server next time.

  7. Click Open.

    The PuTTY screen is displayed. Then the message "login as:" is displayed, prompting you to enter a user name.

    NOTE:

    If this is your first login to the server, the PuTTY Security Alert dialog box is displayed. Click Yes to proceed.

  8. Enter the user name and password.

    If the login is successful, the server host name is displayed on the left of the prompt.

Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100036739

Views: 16331

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next