No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro XH628 V5 Server Node V100R005 Maintenance and Service Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preventing Electrostatic Discharge

Preventing Electrostatic Discharge

The static electricity on fingers or other electrical conductors may damage the mainboard or other electrostatic-sensitive devices and shorten the product life.

To minimize ESD damage, observe the following precautions:

  • Lay ESD floors or ESD cushions in the entire equipment room, and use ESD chairs. The equipment room is equipped with ESD clapboards, ESD screens, and ESD curtains.
  • All floor-standing electric devices, metal frames, and metal chassis shells in the equipment room must be directly grounded. All electric meters or tools on a workbench must be connected to the common ground point of the workbench.
  • Monitor the temperature and humidity in the equipment room. The heating system reduces indoor humidity and increases ESD.
  • Place unused products into ESD bags to prevent direct contact with humans during transportation and storage.
  • Before products arrive at an ESD area, store them in their own packages.
  • Place the product package on a grounded surface before taking out the product.
  • Wear an ESD wrist strap when installing or removing a server component. Ensure that the ground terminal of the ESD wrist strap is inserted into the ESD jack in the chassis.
  • During parts replacement, keep new server components in ESD bags before installation, and place removed server components on ESD mats for temporary storage.
  • Do not touch pins, wires, or integrated circuits.
Translation
Download
Updated: 2019-08-12

Document ID: EDOC1100036739

Views: 13348

Downloads: 20

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next