No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - Interface Management

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interface Numbering Rules

Interface Numbering Rules

Management Interface Numbering Rules

The management interface of S600–E series switches is a console interface that is described as console 0 on the command line interface (CLI).

Physical Interface Numbering Rules

Physical interfaces are numbered in the following way:

A single switch uses slot ID/subcard ID/interface sequence number to identify physical interfaces.
  • Slot ID: indicates the slot where the switch is located. The value is 0.
  • Subcard ID: indicates the ID of a subcard.
  • Interface sequence number: indicates the sequence number of an interface on the switch.
A stacked switch uses Stack ID/subcard ID/interface sequence number to identify physical interfaces.
  • Stack ID: indicates the ID of a stacked switch. The value ranges from 0 to 8.
  • Subcard ID: indicates the ID of a subcard.
  • Interface sequence number: indicates the sequence number of an interface on the switch.

As shown in Figure 1-1, There are two rows of service interfaces on the device. These interfaces are numbered from bottom to top and left to right, starting from 1.

For example, the interface on the top left is numbered 0/0/2.

Figure 1-1  Numbering Diagram

Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037947

Views: 4595

Downloads: 4

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next