No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R012C00 Configuration Guide - Interface Management

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Interface Traffic Statistics

Clearing Interface Traffic Statistics


To monitor the status of an interface or locate faults on the interface, collect traffic statistics on the interface. Before collecting traffic statistics on an interface within a period, clear the existing traffic statistics on this interface.

Interface statistics cannot be restored after they are cleared. Confirm your action before performing an operation.


  • Run the reset counters interface [ interface-type [ interface-number ] ] command to clear the interface statistics.
  • Run the reset counters if-mib interface [ interface-type [ interface-number ] ] command to clear traffic statistics on an interface in the network management system.
Updated: 2018-09-01

Document ID: EDOC1100037947

Views: 5106

Downloads: 4

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next