No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - Interface Management

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Ethernet Interfaces

Licensing Requirements and Limitations for Ethernet Interfaces

Involved Network Element

Other network elements are not required.

Licensing Requirements

An Ethernet interface is a basic feature of a switch and is not under license control.

Version Requirements

Table 2-1  Products and versions supporting Ethernet interfaces

Product

Version Supporting Different Types of Interfaces

S600-E

GE electrical interfaces/GE optical interfaces/XGE optical interfaces:

V200R010C00, V200R011C00, V200R011C10, V200R012C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • Table 2-2 lists the common attributes of Ethernet interfaces.

    Table 2-2  Common attributes of Ethernet interfaces

    Interface Type

    Common attributes

    Remarks

    GE electrical interfaces

    • Transmission medium: network cable
    • Rate: 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s
    • Duplex mode: full-duplex/half-duplex. When the rate is 1000 Mbit/s, only full-duplex is supported.
    • Auto-negotiation: supported
    • Flow control: supported
    • Flow control auto-negotiation: supported

    -

    GE optical interfaces

    When the transmission medium is a GE optical module:
    • Rate: 100 Mbit/s and 1000 Mbit/s
    • Duplex mode: full-duplex
    • Auto-negotiation: supported
    • Flow control: supported
    • Flow Control Auto-Negotiation: When the rate is 1000 Mbit/s, the function is supported. When the rate is 100 Mbit/s, the function is not supported.
    When the transmission medium is a GE copper module:
    • Rate: 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s
    • Duplex mode: full-duplex/half-duplex. When the rate is 1000 Mbit/s, only full-duplex is supported.
    • Auto-negotiation: supported
    • Flow control: supported
    • Flow control auto-negotiation: supported
    • By default, auto-negotiation is enabled on GE optical interfaces and rate auto-negotiation is disabled. You can run the speed auto-negotiation command to enable rate auto-negotiation.
    • After running the speed auto-negotiation command to configure rate auto-negotiation on a GE optical interface working in auto-negotiation mode, you cannot configure flow control auto-negotiation on the interface.

    XGE (10GE) optical interface

    When the transmission medium is an XGE optical module:
    • Rate: 10000 Mbit/s
    • Duplex mode: full-duplex
    • Auto-negotiation: not supported
    • Flow control: supported
    • Flow control auto-negotiation: not supported
    When the transmission medium is a GE optical module:
    • Rate: 1000 Mbit/s
    • Duplex mode: full-duplex
    • Auto-negotiation: supported
    • Flow control: supported
    • Flow control auto-negotiation: not supported
    When the transmission medium is a GE copper module:
    • Rate: 1000 Mbit/s
    • Duplex mode: full-duplex
    • Auto-negotiation: supported
    • Flow control: supported
    • Flow control auto-negotiation: supported

    -

  • Only the XGE optical interfaces that have XGE optical modules installed support unidirectional single-fiber communication.

Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037947

Views: 4505

Downloads: 4

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next