No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R012C00 Configuration Guide - Interface Management

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Log Function for Inbound and Outbound Packet Loss Caused by Congestion

Enabling the Log Function for Inbound and Outbound Packet Loss Caused by Congestion


Network congestion during service transmission may cause packet loss. If a lot of packets are discarded, services are affected. To better monitor the number of discarded packets, you can run the log-threshold { input-discard | output-discard }* command in the system view to enable the log function for inbound and outbound packet loss caused by congestion. The device generates a log when the number of discarded incoming and outgoing packets on the interface in a specified period exceeds the threshold. Logs help you know the congestion on the interface. You can determine whether to increase the bandwidth or cancel the bandwidth limit on the interface based on the logs. In this way, the congestion problem can be solved.


  1. Run system-view

    The system view is displayed.

  2. Run log-threshold { input-discard | output-discard }*

    The log function for packet loss caused by congestion is enabled on all interfaces.

Updated: 2018-09-01

Document ID: EDOC1100037947

Views: 5706

Downloads: 4

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next