No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Static Member Port

(Optional) Configuring a Static Member Port

Context

A member port is on a Layer 2 device and connects to receiver hosts which are multicast group members. The member port can be configured manually or learned dynamically by multicast protocols. When IGMP snooping is enabled in a VLAN, all interfaces in this VLAN learn forwarding entries from multicast packets. When an interface receives IGMP Report messages, the Layer 2 device sets this interface as a dynamic member port. A dynamic member port has an aging time.

If the hosts connected to an interface need to receive multicast data for a specific group or source-group for a long time, add the interface statically to the multicast group or source-group. The manually added interface is a static member port. Static member ports will not be aged out.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. (Optional) Run undo igmp-snooping learning vlan { { vlan-id1 [ to vlan-id2 ] } &<1-10> | all }

    Dynamic member port learning is disabled.

    By default, dynamic member port learning is enabled. If this function is disabled, interfaces must be statically added to a multicast group when they need to forward multicast data for this group.

  4. Run l2-multicast static-group [ source-address source-ip-address ] group-address group-ip-address vlan { vlan-id1 [ to vlan-id2 ] } &<1-10>

    The interface is manually added to a multicast group and becomes a static member port.

    Or run l2-multicast static-group [ source-address source-ip-address ] group-address group-ip-address1 to group-ip-address2 vlan vlan-id

    The interface is added to multiple multicast groups.

Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 12306

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next