No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Basic IGMP Snooping Function Configuration

Verifying the Basic IGMP Snooping Function Configuration

Context

Run the following commands in any view to check IGMP snooping configurations and forwarding entries.

Procedure

  • Run the display igmp-snooping [ vlan [ vlan-id ] ] configuration command to check the IGMP snooping configuration in a VLAN.
  • Run the display igmp-snooping [ vlan [ vlan-id ] ] command to check all the IGMP snooping running parameters in a VLAN.
  • Run the display igmp-snooping port-info [ vlan vlan-id [ group-address group-address ] ] [ verbose ] command to check member ports of a multicast group.
  • Run the display igmp-snooping host-tracking [ vlan vlan-id [ group-address group-address ] ] [ interface { interface-type interface number } ] command to check information about group member hosts.
  • Run the display igmp-snooping router-port vlan [ vlan-id ] command to check router ports.
  • Run the display l2-multicast forwarding-table vlan [ vlan-id ] [ [ source-address source-address ] group-address { group-address | router-group } ] command to check the Layer 2 multicast forwarding table in a VLAN.
  • Run the display l2-multicast forwarding-mode vlan [ vlan-id ] command to check the Layer 2 multicast data forwarding mode in the VLAN.
  • Run the display igmp-snooping querier vlan [ vlan-id ] command to check the IGMP snooping querier configuration.
Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 12305

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next