No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring an SSM Group Policy

(Optional) Configuring an SSM Group Policy

Context

By default, Source-Specific Multicast (SSM) group addresses range from 232.0.0.0 to 232.255.255.255. If a user joins a multicast group with an IP address out of this range, configure an SSM group policy in the VLAN to add the group address to the SSM group address range. The SSM group policy must be used together with an ACL. For details on how to configure an ACL, see ACL Configuration in the S600-E V200R012C00 Configuration Guide - Security.

NOTE:

By default, the ACL applied to an SSM group policy denies all multicast groups. To exclude specific group addresses from the SSM group address range, use a rule permit source any rule with deny rules in the ACL.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vlan vlan-id

    The VLAN view is displayed.

  3. Run igmp-snooping ssm-policy basic-acl-number

    An SSM group policy is configured.

    After you configure an SSM group policy, the multicast groups specified in the SSM policy are treated as SSM groups.

Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 13103

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next