No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic MLD Snooping Functions

Configuring Basic MLD Snooping Functions


Basic MLD snooping configuration enables the switch to generate and maintain the IPv6 Layer 2 multicast forwarding table and distribute multicast data to receivers at the data link layer.

Pre-configuration Tasks

Before configuring basic MLD snooping functions, complete the following tasks:
  • Connect interfaces and set physical parameters on the interfaces to make them physically Up.
  • Create VLANs.
  • Add interfaces to VLANs.

Configuration Procedure

Enabling MLD Snooping and Setting the MLD Snooping Version are mandatory. Select other tasks based on your network requirements.

Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 13341

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next