No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Static Member Port

(Optional) Configuring a Static Member Port

Context

Group member ports are connected to user hosts, and can be learned dynamically or configured manually. After MLD snooping is enabled in a VLAN, all interfaces in the VLAN learn multicast protocols packets by default. When an interface receives an MLD Report message, it becomes a dynamic member port. A dynamic member port has an aging timer.

If the user hosts connected to an interface need to receive multicast packets of a specific group or sent from a specific source to a specific group, add the interface to the group or source-group manually. The interface then becomes a static member port. Static member ports will never age.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. (Optional) Run undo mld-snooping learning vlan { { vlan-id1 [ to vlan-id2 ] } &<1-10> | all }

    Dynamic learning of member ports is disabled.

    By default, dynamic learning of member ports is enabled. If this function is enabled, the interfaces that need to forward multicast data to hosts must be manually added to a multicast group.

  4. Run mld-snooping static-group group-ipv6-address [ source source-ipv6-address ] vlan vlan-id

    The interface is manually added to a multicast group.

Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 12310

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next