No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MLD Snooping Proxy

Configuring MLD Snooping Proxy

Pre-configuration Tasks

Enabling MLD Snooping

Context

MLD snooping proxy enables the switch to send Query messages to user hosts in place of the upstream Layer 3 device, and to send MLD Report/Done messages to the Layer 3 device in place of user hosts. This function conserves bandwidth between the upstream device and switch.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vlan vlan-id

    The VLAN view is displayed.

  3. Run mld-snooping proxy

    MLD snooping proxy is enabled.

    NOTE:
    • MLD querier and MLD message suppression can be enabled in the same VLAN to implement the MLD snooping proxy function. After you configure MLD snooping proxy in a VLAN, do not configure MLD snooping querier or MLD message suppression in the VLAN. For details about the configuration of MLD snooping querier and MLD message suppression, see (Optional) Configuring the MLD Snooping Querier and (Optional) Suppressing Report and Done Messages.

    • If multicast VLAN replication is configured on the switch, MLD snooping proxy cannot be enabled in user VLANs.

Verifying the Configuration

After the configurations are complete, run the display mld-snooping [ vlan vlan-id ] configuration command in any view to check MLD snooping proxy configurations in the VLAN.

Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 13373

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next