No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring 1-to-N Multicast Replication Based on User VLANs

Configuring 1-to-N Multicast Replication Based on User VLANs


1-to-N multicast replication based on user VLANs enables a switch to copy and send multicast data to different user VLANs, reducing bandwidth consumption on the upstream device.

Configuration Procedure


Currently, the switch supports 1-to-N multicast replication based on user VLANs on IPv4 and IPv6 networks. The configuration for IPv6 networks is the same as that for IPv4 networks, except that you must enable IGMP snooping on an IPv4 network and MLD snooping on an IPv6 network. The configuration process for an IPv4 network is used as an example.

Perform the configuration in the listed sequence:

Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 13315

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next