No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a User VLAN

Configuring a User VLAN

Context

Before configuring N-to-N multicast VLAN replication based on user VLANs, you must enable Layer 2 Internet Group Management Protocol (IGMP) snooping in user VLANs and enable the triggering of multicast flows.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run igmp-snooping enable

    IGMP snooping is enabled globally.

  3. Run vlan vlan-id

    A VLAN is created, and the VLAN view is displayed.

  4. Run igmp-snooping enable

    IGMP snooping is enabled in the VLAN.

  5. Run multicast flow-trigger enable

    The triggering of multicast flows is enabled in the VLAN.

Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 13408

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next