No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
User Hosts in the User VLAN Fail to Receive Multicast Data

User Hosts in the User VLAN Fail to Receive Multicast Data

Fault Description

After VLAN-based multicast VLAN replication is configured, user hosts in the user VLAN cannot receive multicast data.

Procedure

  • Check whether multicast VLAN replication is correctly configured.

    Run the display multicast-vlan vlan vlan-id command to check whether the user VLAN is bound to a correct multicast VLAN.

    • If the user VLAN is not bound to a correct multicast VLAN, run the multicast-vlan user-vlan command to bind VLANs correctly.
    • If the user VLAN is bound to a correct multicast VLAN, check whether other Layer 2 multicast configurations conflict.
      The following information shows that user VLANs 100 and 200 are bound to multicast VLAN 10 correctly.
      [HUAWEI] display multicast-vlan vlan 10
       Multicast-vlan         : 10
       User-vlan Number       : 2
       IGMP snooping state    : Enable
       MLD  snooping state    : Disable
       Prune-source-port state: Disable 
       User-vlan              Snooping-state
       -----------------------------------------------
       100                     IGMP Enable /MLD Disable
       200                     IGMP Enable /MLD Disable

Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 12288

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next