No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R012C00 Configuration Guide - IP Multicast

This document describes the configurations of IP multicast, including IGMP snooping, MLD snooping, static multicast MAC address, multicast VLAN replication, controllable multicast, multicast network management.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Multicast Group List

Configuring a Multicast Group List


After you configure a multicast group, add the group to a multicast group list.


  1. Run system-view

    The system view is displayed.

  2. Run btv

    The broadband TV (BTV) view is displayed.

  3. Run multicast-list list-name

    A multicast group list is created and the multicast group list view is displayed.

  4. Run add multicast-group { name group-name | index start-index to end-index }

    The multicast group is added to the multicast group list.

Updated: 2018-09-01

Document ID: EDOC1100037948

Views: 13349

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next