No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R012C00 Configuration Guide - VPN

This document describes the configurations of VPN, including IPSec, MCE.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MCE Configuration

Verifying the MCE Configuration


The configurations of the Multi-VPN-Instance CE function are complete.


  • Run the display ip routing-table vpn-instance vpn-instance-name [ verbose ] command to check the VPN routing table on the multi-instance CE. If there are routes to the LAN and the remote nodes for each service, the configuration is successful.
Updated: 2018-09-01

Document ID: EDOC1100037956

Views: 2899

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next