No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R012C00 Configuration Guide - VPN

This document describes the configurations of VPN, including IPSec, MCE.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the IPv6 MCE Configuration

Verifying the IPv6 MCE Configuration

Prerequisites

The IPv6 MCE configuration is complete.

Procedure

  • Run the display ip vpn-instance vpn-instance-name command to check brief information about a specified VPN instance.
  • Run the display ip vpn-instance verbose vpn-instance-name command to check detailed information about a specified VPN instance.
  • Run the display ip vpn-instance [ vpn-instance-name ] interface command to check brief information about the interface to which a specified VPN instance is bound.
  • Run the display ipv6 routing-table vpn-instance vpn-instance-name [ verbose ] command to check the IPv6 routing table on the MCE device. The routing table contains routes to the LAN and remote sites for each service.
Translation
Download
Updated: 2018-09-01

Document ID: EDOC1100037956

Views: 2837

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next