Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Switches Are Connected Across a Transmission Device
As shown in Figure 3-14, two switches are positioned far away from each other. In order for the switches to communicate, a transmission device needs to be deployed between them. In addition, to enhance link bandwidth and reliability, link aggregation is configured between the two switches. To achieve this, the following conditions must be met:
- The switches at both ends must use link aggregation in LACP mode.
- The transmission device between the switches must be configured to transparently transmit LACPDUs.
Previous
