No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default VLAN

Default VLAN

The default VLAN ID of an interface is called the port default VLAN ID (PVID). Frames processed in a switch all carry VLAN tags. Whether the VLAN tags are added or removed depends on whether the frame is tagged or untagged, and whether the frame has the same VLAN ID as the interface's PVID. The details are as follows:
  • When an interface receives an untagged frame, the switch adds a tag with the PVID to the frame and processes the frame. When an interface receives a tagged frame, the switch does not add a tag with the PVID to the frame.
  • When an interface sends a frame in which the VLAN ID is the same as the PVID, the switch removes the tag from the frame before sending it out from the interface.
Each interface has a default VLAN. By default, the default VLAN ID of all interfaces is VLAN 1. The following describes the effect of changing the default VLAN ID on different interface types:
  • The default VLAN of an access interface is the VLAN allowed by the access interface. Changing the allowed VLAN of an access interface will change its default VLAN.
  • Trunk and hybrid interfaces allow multiple VLANs but have only one default VLAN. Changing the allowed VLANs will not change the default VLAN.
Updated: 2019-01-18

Document ID: EDOC1100038103

Views: 127958

Downloads: 53

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next