No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Rapidly Query the Link Types and Default VLANs of All Interfaces?

How Do I Rapidly Query the Link Types and Default VLANs of All Interfaces?

Run the display port vlan command to check the link types and default VLANs of all interfaces. For example:
<HUAWEI> display port vlan
Port                        Link Type    PVID  Trunk VLAN List
Eth-Trunk0                  desirable    1     1-4094
Eth-Trunk1                  trunk        1     1 11  
Eth-Trunk5                  hybrid       1     -     
Eth-Trunk10                 desirable    1     1-4094
Eth-Trunk12                 trunk        1     1     
GigabitEthernet9/0/1        trunk        1     1 8   
GigabitEthernet9/0/3        access       10    -     
GigabitEthernet9/0/4        hybrid       1     -     
GigabitEthernet9/0/5        hybrid       1     -     
GigabitEthernet9/0/6        desirable    1     1-4094
GigabitEthernet9/0/7        desirable    1     1-4094
GigabitEthernet9/0/8        desirable    1     1-4094
GigabitEthernet9/0/9        trunk        1     1 17  
GigabitEthernet9/0/10       desirable    1     1-4094
GigabitEthernet9/0/11       desirable    1     1-4094
GigabitEthernet9/0/12       desirable    1     1-4094
GigabitEthernet9/0/13       desirable    1     1-4094
GigabitEthernet9/0/14       desirable    1     1-4094
GigabitEthernet9/0/15       hybrid       1     -     
GigabitEthernet9/0/17       access       103   -     
GigabitEthernet9/0/18       desirable    1     1-4094
GigabitEthernet9/0/19       desirable    0     -     
GigabitEthernet9/0/20       desirable    1     1-4094
GigabitEthernet9/0/21       desirable    1     1-4094
GigabitEthernet9/0/22       desirable    1     1-4094
GigabitEthernet9/0/23       hybrid       200   -     
Wlan-Ess1                   trunk        1     1     
XGigabitEthernet6/0/0       desirable    1     1-4094
XGigabitEthernet6/0/1       desirable    1     1-4094
XGigabitEthernet6/0/2       desirable    1     1-4094
XGigabitEthernet6/0/3       desirable    1     1-4094

The Link Type field indicates the link type of an interface, the PVID field indicates the default VLAN, and the Trunk VLAN List field indicates the list of VLANs allowed by a trunk interface. If the interface did not join any VLAN, the Trunk VLAN List field is displayed as -. If the link type of an interface is negotiation-desirable or negotiation-auto, the Trunk VLAN List field is displayed as 1 to 4094.

Updated: 2019-01-18

Document ID: EDOC1100038103

Views: 116884

Downloads: 52

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next