No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R012C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, VLAN aggregation, MUX VLAN, VLAN termination, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Inter-VLAN Layer 3 Isolation

Inter-VLAN Layer 3 Isolation

After inter-VLAN Layer 3 connectivity is implemented between two VLANs, all users in the VLANs can communicate. In some scenarios, communication between some users needs to be prevented or only unidirectional communication is allowed. For example, user hosts and servers often use unidirectional communication, and visitors to an enterprise are often allowed to access only the Internet or some servers. In these scenarios, you need to configure inter-VLAN isolation.

Inter-VLAN isolation is often implemented using a traffic policy. You can define traffic classifiers on a switch to match packets with certain characteristics and associate the traffic classifiers with the permit or deny behavior in a traffic policy. The switch then permits or rejects the packets matching the traffic classifiers. This technology implements flexible inter-VLAN isolation.

The switch supports inter-VLAN Layer 3 isolation based on MQC and ACL-based simplified traffic policies. For details about MQC and ACL-based simplified traffic policies, see MQC Configuration and ACL-based Simplified Traffic Policy Configuration in the S12700 V200R012C00 Configuration Guide - QoS.

Updated: 2019-01-18

Document ID: EDOC1100038103

Views: 127055

Downloads: 53

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next