No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the Device Serial Number

Displaying the Device Serial Number

Context

Each device has a unique equipment serial number (ESN), which must be provided when you request technical assistance or apply for a license.

Procedure

  • Run the display esn command to view the serial number of a device.
  • Run the display device manufacture-info [ slot slot-id | backplane ] command to view manufacturing information about the device, including the serial number and manufacturing date.

FAQ

How Can I View the Serial Number of a Device?

Method 1: Obtain the Chassis Serial Number by Using a Command

On a standalone device

Run the display elabel backplane command to view electronic label information. In the command output, BarCode specifies the chassis serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding chassis parameters.
<Quidway> display elabel backplane
Info: It is executing, please wait...

[BackPlane_1]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0

[Board Properties]
BoardType=LE0B1SA04
BarCode=2102113089P0BB000881
Item=02113089
......

In a CSS

Log in to the master switch through Telnet or the Console port, and run the display elabel backplane chassis chassis-id command in the user view to view electronic label information. In the command output, BarCode specifies the chassis serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding chassis parameters.
<Quidway> display elabel backplane chassis ?
  INTEGER<1-2>  Chassis ID                                                      
 
<Quidway> display elabel backplane chassis 2
Info: It is executing, please wait...                                           
                                                                                
[BackPlane_2]                                                                   
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0

[Board Properties]                                                              
BoardType=LE0B1SA04
BarCode=2102113089P0BB000881                                                        
Item=02113549                                                                   
......
NOTE:

You can run the display device manufacture-info command to check the serial number obtained from the electronic label. Only V200R003 and later versions support this command.

Method 2: Obtain the Chassis Serial Number Through the Web System

When enabled on a device, the web system can be used to view the chassis serial number.

NOTE:
  • The S9300E does not support the web system.

EasyOperation web system (supported only in V200R005 and later versions)

Log in to a device through the web system and click Monitor on the toolbar to enter the Monitor page. You can view device information, including the chassis serial number, as shown in Figure 1-1.

Figure 1-1  System Description

Web system classical version

Log in to a device through the web system and click Device Summary on the toolbar to view device information, including the chassis serial number, as shown in Figure 1-2.

Figure 1-2  System Description
Method 3: Obtain the Chassis Serial Number Onsite

You can obtain the chassis serial number onsite. The chassis serial number label is attached to the top side of the chassis, as shown in Figure 1-3.

Figure 1-3  Location of the serial number label (An S9306E chassis is used as an example.)

How Can I View the Serial Number of a Card?

Method 1: Obtain the Board Serial Number by Using a Command
Run the display elabel command to view electronic label information, and select the slot ID according to the command prompt information. In the command output, BarCode specifies the board serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding board parameters.
<Quidway> display elabel ?
  <1-1>      The present chassis                                                
  backplane  Backplane                                                          
  brief      Display information briefly                                        
  <cr> 
<Quidway> display elabel 1/?
  <4,6-8>                                 <CMU1>
  <FAN1-FAN2>                             <PWR1-PWR2>
<Quidway> display elabel 1/6 brief
Info: It is executing, please wait...                                           
                                                                                
                                                                                
[Slot_6]                                                                       
/$[Board Integration Version]                                                   
/$BoardIntegrationVersion=3.0                                                   
                                                                                
                                                                                
[Main_Board]                                                                    
/$[ArchivesInfo Version]                                                        
/$ArchivesInfoVersion=3.0                                                       
                                                                                
                                                                                
[Board Properties]                                                              
BoardType=LE0DG48TFA00
BarCode=020LVF6TBB000043                                                 
Item=03020LVF                                                                    
......
NOTE:

You can run the display device manufacture-info command to check the serial number obtained from the electronic label. Only V200R003 and later versions support this command.

Method 2: Obtain the Board Serial Number Through the Web System (Supported only on MPUs and LPUs)

When enabled on a device, the web system can be used to view the board serial number.

NOTE:
  • The S9300E does not support the web system.

EasyOperation web system (supported only in V200R005 and later versions)

Log in to the switch through the web system, and click Monitor on the toolbar to enter the Monitor page. You can view board information. Move the mouse pointer to a board to display basic information about the board, including port, version, and serial number, as shown in Figure 1-4.

Figure 1-4  Basic board information

Web system classical version

Log in to the switch through the web system, and click Device Summary on the toolbar to enter the Device Summary page. Click the corresponding board on the switch to enter the Board Information page. On the Slot Basic Information tab, you can view basic board information, including the board serial number, as shown in Figure 1-5.

Figure 1-5  Basic slot information
Method 3: Obtain the Card Serial Number Onsite

You can obtain the card serial number onsite. The location of a card serial number label varies according to the card.

  • The cards serial number labels are on the upper right corner of the card panel.
  • The cards serial number labels are on the upper left corner of the card panel.
  • The cards serial number labels are on the PCB of the card.

How Can I View the Serial Number of a Power Module?

Method 1: Obtain the Power Module Serial Number by Using a Command
Run the display elabel command to view electronic label information, and select the power module number according to the command prompt information. In the command output, SN specifies the power module serial number.
<Quidway> display elabel ?
  <1-1>      The present chassis                                                
  backplane  Backplane                                                          
  brief      Display information briefly                                        
  <cr> 
<Quidway> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<Quidway> display elabel 1/PWR1
Info: It is executing, please wait...                                           
                                                                                
[Slot_21]                                                                       
/$[Board Integration Version]                                                   
/$BoardIntegrationVersion=3.0                                                   
                                                                                
                                                                                
[Main_Board]                                                                    
DATE=13_02_08                                                                   
SN=2102310JFA6TGC907205  
NOTE:

The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding power module parameters.

Method 2: Obtain the Power Module Serial Number Onsite

You can obtain the power module serial number onsite. Table 1-1 lists the locations of the power module serial number label.

Table 1-1  Location of the power module serial number label

Power Module Type

Serial Number Label Location

  • 1600 W DC power module

  • 2200 W DC power module

  • 2400 W DC power module

The serial number label is attached on the power module panel, as shown in Figure 1-6.

  • 800 W AC power module

  • 2200 W AC power module

The serial number label is attached on the right shell, as shown in Figure 1-7.

Figure 1-6  Location of the serial number label (A 2200 W DC power module is used as an example.)
Figure 1-7  Location of the serial number label (A 2200 W AC power module is used as an example.)

How Can I View the Serial Number of a Fan Module?

Method 1: Obtain the Fan Module Serial Number by Using a Command
Run the display elabel command to view electronic label information, and select the fan module number according to the command prompt information. In the command output, BarCode specifies the fan module serial number.
<Quidway> display elabel ?
  <1-1>      The present chassis                                                
  backplane  Backplane                                                          
  brief      Display information briefly                                        
  <cr> 
<Quidway> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<Quidway> display elabel 1/FAN2
Info: It is executing, please wait...                                           
                                                                                
[Slot_18]                                                                       
/$[Board Integration Version]                                                   
/$BoardIntegrationVersion=3.0                                                   
                                                                                
                                                                                
[Main_Board]                                                                    
/$[ArchivesInfo Version]                                                        
/$ArchivesInfoVersion=3.0                                                       
                                                                                
                                                                                
[Board Properties]                                                              
BoardType=LE02FCMC                                                              
BarCode=2103010JTF0123456789                                             
Item=02120995                                                                   
......
NOTE:

The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding fan module parameters.

Method 2: Obtain the Fan Module Serial Number Onsite

You can obtain the fan module serial number onsite. The fan module serial number label is attached on the upper right corner at the front side and is a one-dimensional label, as shown in Figure 1-8.

Figure 1-8  Location of the serial number label (A fan module on the S9300 is used as an example.)

How Can I View the Serial Number of an Optical Module?

Method 1: Obtain the Optical Module Serial Number by Using a Command
  • Run the display elabel command to view the electronic label of an optical module. BarCode indicates the serial number of the optical module.
    <Quidway> display elabel
    ......
    [Port_XGigabitEthernet4/0/1]
    /$[ArchivesInfo Version]
    /$ArchivesInfoVersion=3.0
    
    
    [Board Properties]
    BoardType=PLRXPLSCS4322N
    BarCode=CB02UF1SW
    Item=
    Description=10300Mb/sec-850nm-LC-33(OM1),82(OM2),300(OM3),400(OM4)
    Manufactured=2011-01-09
    /$VendorName=JDSU
    IssueNumber=
    CLEICode=
    BOM=
    ......
  • Run the display transceiver interface interface-type interface-number command to view information about a specified optical module. Manu. Serial Number indicates the serial number of the optical module.
    <Quidway> display transceiver interface gigabitethernet 9/0/21
    
    GigabitEthernet9/0/21 transceiver information:
    -------------------------------------------------------------
    Common information:                                                             
      Transceiver Type               :1000_BASE_SX_SFP                              
      Connector Type                 :LC                                            
      Wavelength(nm)                 :850                                           
      Transfer Distance(m)           :0(9um),300(50um),150(62.5um)                  
      Digital Diagnostic Monitoring  :YES                                           
      Vendor Name                    :HUAWEI                              
      Vendor Part Number             :02318169 
      Ordering Name                  :                                              
    -------------------------------------------------------------                   
    Manufacture information:                                                        
      Manu. Serial Number        :CD25HP12M:CD25HP12M                                  
      Manufacturing Date             :2013-06-184                                    
      Vendor Name                    :HUAWEI 
    -------------------------------------------------------------
    Alarm information:
      RX loss of signal
      RX power low
    -------------------------------------------------------------
Method 2: Obtain the Optical Module Serial Number Onsite

You can check the label attached on the optical module to obtain the serial number.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 42938

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next