No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the Memory Usage

Displaying the Memory Usage


Memory usage is an important performance indicator of a device. A high memory usage may cause service faults. You can view the memory usage of a device in real time to determine whether the device is running stably.

You can view the memory usage threshold to check the alarm generation conditions.
  • When memory usage reaches the alarm threshold, the system generates a memory usage alarm.
  • When memory usage falls below the recovery threshold, the system generates a clear alarm.


  • Run the display memory-usage [ slave | slot slot-id ] command to view memory usage statistics.

  • Run the display memory-usage threshold [ slot slot-id ] command to view the memory usage threshold.


Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 43671

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next