No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting a Card

Resetting a Card

Context

If a card needs to be upgraded or it functions abnormally, you can reset the LPU to update the version or restore the LPU to the normal state.

NOTICE:

Resetting a card will interrupt services on the card. If a card malfunctions, rectify the fault rather than reset the card to prevent services from being affected.

Procedure

  1. (Optional) Run display device [ slot slot-id ]

    The card status is displayed.

  2. Run reset slot slot-id

    The card is reset.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 41949

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next