No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Memory Usage Alarm Threshold

Configuring the Memory Usage Alarm Threshold

Context

Memory usage is an important indicator used to evaluate device performance. A high memory usage may cause service faults. If high memory usage occurs when processing data, the device can generate an alarm. This enables you to monitor memory usage and optimize system performance.

  • Memory usage alarm threshold

    When memory usage reaches this threshold, the system generates an alarm.

  • Memory usage alarm recovery threshold

    When memory usage falls below this threshold, the system clears the alarm.

Procedure

  1. (Optional) Run display memory-usage threshold [ slot slot-id ]

    The memory usage configuration is displayed.

  2. Run system-view

    The system view is displayed.

  3. Run set memory-usage threshold threshold-value [ slot slot-id ]

    The memory usage alarm threshold is set.

    By default:
    • If the memory capacity on the card is lower than or equal to 512 MB, the memory usage alarm threshold is 85% and the memory usage alarm recovery threshold is 80%.

    • If the memory capacity on the card is from 512 MB to 2 GB, the memory usage alarm threshold is 90% and the memory usage alarm recovery threshold is 85%.

    • If the memory capacity on the card is higher than 2 GB, the memory usage alarm threshold is 95% and the memory usage alarm recovery threshold is 90%.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 37072

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next