No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling/Disabling CSS Traps

Enabling/Disabling CSS Traps

Context

After you enable CSS traps on the switch, the switch sends trap messages to the network management system (NMS) when the CSS status changes. By default, all CSS traps are enabled. You can use commands to disable all or specified CSS traps. Then the switch no longer sends these traps to the NMS.

To check the status (enabled or disabled) of CSS traps, run the display snmp-agent trap feature-name css all command.

NOTE:

Disabling CSS traps is not recommended.

Procedure

  • Enable CSS traps.

    Run the snmp-agent trap enable feature-name css [ trap-name trap-name ] command to enable a specified CSS trap or all CSS traps.

  • Disable CSS traps.

    Run the undo snmp-agent trap enable feature-name css [ trap-name trap-name ] command to disable a specified CSS trap or all CSS traps.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 38429

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next