No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How to Load a Patch for a Cluster?

How to Load a Patch for a Cluster?

To load a hot patch in the current version, perform the following operations.

  1. Save the patch file to the root directory of the system active MPU.
  2. Run the patch load filename all run command to load and run the patch on all MPUs. If member switches in the cluster have two MPUs installed, the patch is automatically loaded to the standby MPU.
  3. After the patch is loaded, run the display patch-information command to view patch information.

To specify the patch file for the next startup during a version upgrade or downgrade, perform the following operations.

  1. Save the patch file to the root directory of the system active MPU.
  2. Run the copy source-filename destination-filename all command to save the patch file to all MPUs.
  3. Run the startup patch filename all command to specify the patch file for the next startup.
  4. Run the reboot command to restart the device.
  5. After the device is restarted, run the display patch-information command to view patch information.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 39176

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next