No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SVF Management and Maintenance

SVF Management and Maintenance

After an SVF system is set up, access and aggregation devices are virtualized into one logical device. An SVF system is a virtual system, in which the parent configures and manages all member devices. The parent is managed and maintained as a common device. For example, you can log in to the parent through the console port or management port and perform a software upgrade. ASs are managed and maintained using commands on the parent. For example, you can log in to ASs through console ports of ASs, restart ASs, upgrade ASs, load and delete patches for ASs, and replace ASs.


The alarms reported by AS service modules cannot be notified to the network management system (NMS) through the parent.

Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 37466

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next