No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of SVF Configuration Tasks

Summary of SVF Configuration Tasks

Table 4-4 lists SVF configuration tasks.

Table 4-4  SVF configuration tasks
Scenario Description Task
The parent is directly connected to level-1 ASs, level-1 ASs are not connected to level-2 ASs.

This is a typical SVF networking scenario, which supports both wired and wireless access.

  1. Setting Up an SVF System (The Parent Is Directly Connected to ASs)

  2. Configuring Services for an AS

The parent is directly connected to level-1 ASs, level-1 ASs are connected to level-2 ASs.

If many access users exist and the network scale is large, connect level-2 ASs to level-1 ASs.

  1. Setting Up an SVF System (The Parent Is Directly Connected to ASs)

  2. Configuring Services for an AS

During SVF setup, configure the fabric port that connects a level-1 AS to a level-2 AS for AS access.

The parent is connected to level-1 ASs across a network,.

If some access devices are connected to aggregation devices across a Layer 2 network, use the configuration performed in this scenario.

  1. Setting Up an SVF System (The Parent Is Connected to ASs Through a Layer 2 Network)

  2. Configuring Services for an AS

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 42164

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next