No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for PoE

Application Scenarios for PoE

Terminals such as IP phones, cameras, and data collectors require DC power. These terminals are usually installed in corridors or on the ceilings where power sockets are unavailable. On most large-scale LANs, administrators manage many access point devices that require centralized power supply, making power supply management difficult.

In Figure 5-2, SwitchA, SwitchB, SwitchC, and SwitchD are acting as PSEs, providing power to IP phones and cameras. Using PoE reduces the need for power cables, lowers network construction costs, and facilitates access device management by eliminating the need for external power supplies.

Figure 5-2  PoE application

Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 42859

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next