No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Collecting OIDS Database Files

Collecting OIDS Database Files

Context

After the OIDS function is enabled, the switch saves the collected data and fault diagnosis results to database files on the active MPU. When you view OIDS data within a period of time, the switch reads and displays only the OIDS database files on the active MPU. For a dual-MPU or cluster switch, if an active/standby MPU switchover has been performed before you view OIDS data within a certain period of time, the OIDS database files used before the switchover are stored on the current standby MPU. In this case, you need to save the OIDS database files on the standby MPU to the active MPU, and then view OIDS data in the files. Otherwise, you may view incomplete OIDS data.

NOTE:

The contents of OIDS database files cannot be manually modified.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the collect oids database file to system-master command to save OIDS database files to the active MPU.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 37406

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next