No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking OIDS Event Information

Checking OIDS Event Information

Context

OIDS event information enables you to learn about diagnosis object attributes that are abnormal or require special attention and to detect faulty services in a timely manner. For example, if the collected ARP_Usage data exceeds 85%, the OIDS module records the ARP Usage High event. If the collected ARP_Usage data falls below 75%, the OIDS module records the ARP Usage Normal event. For details about the OIDS events supported by the device, see Appendix 2: OIDS Events Supported by the Switch.

Procedure

  • Run the display oids current-event [ slot slot-id ] command to check information about OIDS events generated after the switch starts.
  • Run the display oids history-event [ type type-name [ { object-index object-index | object-name object-name } [ { attribute-index attribute-index | attribute-name attribute-name } ] ] ] [ slot slot-id ] [ { before | after } date-time time date ] [ period { 1h | 24h } ] command to check information about OIDS events generated within a certain period.
  • Run the display oids register-event [ slot slot-id ] command to check information about OIDS events registered on the switch.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 43216

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next