No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Information Classification

Information Classification

The device generates three types of messages: logs, traps, and debugging messages. Table 9-1 describes these three types of information.
Table 9-1  Classification of information
Information Type Description

Log

Logs record user operations, system faults, and system security, including user logs, security logs, and diagnostic logs.
  • User logs record user operations and system operating information.
  • Security logs record security information, including user account management, protocols, attack defense, and status.
  • Diagnostic logs record information used for fault location.

Trap

Traps are notifications generated when the device detects faults. They record system status information.

Unlike logs, traps need to be notified to administrators in a timely manner.

Debugging message

Debugging messages show internal operating information of the system. They are mainly used to trace the device running status.

Debugging messages are generated only after the debugging of a module is enabled.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 37546

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next