No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Trap Output Configuration

Verifying the Trap Output Configuration

Procedure

  • Run the display channel [ channel-number | channel-name ] command to view the channel configuration.
  • Run the display info-center filter-id [ id | bymodule-alias modname alias ] command to view information filtered by the information center.
  • Run the display logfile file-name [ offset | hex ] * command to check the log file.
  • Run the display trapbuffer [ size value ] command to check traps recorded in the trap buffer.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 43697

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next