No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Basic Concepts of Fault Management

Basic Concepts of Fault Management

  • Alarm:

    An alarm is generated when a device notifies users of a fault. Maintenance personnel learn the device running status and locate faults based on alarms.

  • Active alarm:

    An active alarm is the notification of generating an alarm. For example, the hwFanInvalid alarm indicates that the fan is faulty.

  • Clear alarm:

    A clear alarm is the notification of clearing an alarm. For example, the hwFanInvalidResume alarm indicates that the fan fault is rectified.

    Each active alarm maps a clear alarm.

  • Event:

    An event is generated to inform maintenance personnel of the device operating state.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 39174

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next