No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the NTP Access Control Configuration

Verifying the NTP Access Control Configuration

Prerequisites

The configuration of NTP access control is completed.

Procedure

  • Run the display current-configuration | include ntp command to view NTP configuration.
  • Run the display ntp-service status command to view the NTP service status.
  • Run the display ntp-service sessions [ verbose ] command to view the NTP session status.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 39202

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next