No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Locking a Clock Source

Locking a Clock Source

Context

By locking a clock source, you can prevent the clock source from being selected.

Do as follows on the device where you need prevent a clock source from being selected.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run clock lockout source source { system | bits0 | bits1 }

    A clock source is locked and cannot be selected as the reference clock source.

    By default, all clock sources participate in clock source selection.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 37458

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next