No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of PTP

Overview of PTP


PTP is used to implement high-precision time and frequency synchronization between devices on an Ethernet network. In this document, PTP includes 1588v2 and G.8275.1.

IEEE 1588 provides high-precision time synchronization. Two versions exist: 1588v1 and 1588v2. IEEE 1588v1 provides sub-millisecond precision time synchronization. This version has been replaced by IEEE 1588v2, which provides sub-microsecond precision time synchronization.


On wireless networks, clock synchronization is critical in enabling successful communication between the mobile bearer network and base stations. A number of methods, such as the global positioning system (GPS), Network Time Protocol (NTP), and synchronous Ethernet, can be used to implement time and frequency synchronization. However, GPS requires antennas to be deployed at each base station, leading to high deployment and maintenance costs. NTP provides only sub-second precision time synchronization, which is unable to meet precise synchronization requirements. Synchronous Ethernet supports only high-precision frequency synchronization but not time synchronization.

PTP addresses the limitations found in the preceding methods. It is inexpensive to deploy and maintain. 1588v2 can provide sub-microsecond precision time synchronization and offers increased security because it operates independent of the GPS.


  • Provides sub-microsecond precision time synchronization for transmission devices.
  • Reduces network construction and maintenance costs because a GPS receiver does not need to be deployed or maintained for each base station.
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 43347

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next