No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

S9300, S9300E, and S9300X V200R012C00

This document describes the configurations of Device Management, including device status query, hardware management, CSS, SVF, PoE, OPS, OIDS, energy-saving management, information center, fault management, NTP, synchronous ethernet, PTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for PTP

Default Settings for PTP

Table 13-3  Default settings for PTP


Default Setting

Global PTP function


Interface PTP function


PTP domain

Domain 0

Method to process Announce messages on an interface

Retaining Announce messages

Mode in which PTP messages carry timestamps


Interval for sending Announce messages

128 ms

Timeout period for receiving Announce messages 512 ms
Minimum interval for sending DelayReq and PdelayReq messages 128 ms
Encapsulation mode of 1588v2 messages MAC multicast encapsulation
Encapsulation mode of G.8275.1 messages MAC multicast encapsulation
Updated: 2018-09-03

Document ID: EDOC1100038289

Views: 39299

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next